LEGO Mindstorms works with the IR remote control by allowing users to program their robots to respond to specific commands sent by the remote control. The IR remote control sends signals to the IR sensor on the Mindstorms robot, which then triggers the programmed actions or movements. Users can customize the responses of their robots to different remote control commands by using the programming software provided by LEGO Mindstorms. This allows for a more interactive and dynamic experience when controlling the robot with the remote control. **

The length of time a sequence of an IR remote control lasts can vary depending on the specific remote control and its battery life. Generally, a sequence of commands sent by an IR remote control typically lasts for a few milliseconds to a few seconds. However, this duration can be extended if the remote control is continuously sending commands or if the battery is low. It is important to replace the batteries in the remote control regularly to ensure optimal performance. **

To address a locomotive with a Märklin IR remote control, you will need to follow these steps: 1. Turn on the Märklin IR remote control and the locomotive. 2. Press the "Address" button on the remote control to enter the address programming mode. 3. Use the number buttons on the remote control to enter the desired address for the locomotive. 4. Press the "Enter" or "Set" button to confirm the address. Once the address has been successfully programmed, you should be able to control the locomotive using the Märklin IR remote control. **

The IR remote control of the Samsung Galaxy S5 works by using the built-in infrared blaster to send signals to compatible electronic devices such as TVs, set-top boxes, and DVD players. The remote control app on the Galaxy S5 allows users to select the type of device they want to control and then sends the corresponding infrared signal to the device. This allows users to control their home entertainment systems directly from their smartphone, eliminating the need for multiple remote controls. **

An IR LED in a remote control blinks instead of shining constantly to conserve energy and to send a modulated signal to the receiving device. By blinking on and off, the IR LED can transmit data in the form of binary code, allowing the remote control to send specific commands to the device it is controlling. This blinking also helps to differentiate the signal from ambient light and other sources of infrared radiation, ensuring that the intended device receives the command accurately. **

To change the IR control, one can typically do so by accessing the settings menu on the device being controlled by the remote. Within the settings menu, there should be an option to reprogram or reset the IR control. This may involve selecting a new code or frequency for the remote to transmit. If the remote control itself has a specific button or sequence to change the IR control, refer to the user manual for instructions. **

The IR control can be changed by reprogramming the remote control to send different infrared signals. This can be done by accessing the settings on the remote control and inputting new codes for the devices you want to control. Some remote controls also have the option to learn new IR commands from other remotes, allowing you to customize the control to your specific needs. Additionally, some universal remote controls can be programmed using a computer or smartphone app to change the IR control settings. **

The person who knows this remote control is likely the owner or someone who has been given permission to use it. They would be familiar with its functions, how to operate it, and where it is usually kept. It could also be someone who has been trained to use the remote control for a specific purpose, such as a technician or a staff member in charge of operating a particular device. **